Air Induction Oxydation - AIO SystemsSingle Tank Aeration Systems for treatment of Ferrous Iron & Hydrogen Sulfide
Highly effective single tank aeration/filtration units made with heavy-duty standard industry parts for the reduction of iron, manganese and hydrogen sulfide in residential well water.
A control valve (center) oversees the backwash of the filter, renewing and resettling the media bed, and renews the air pocket in the top of the treatment tank.
Aeration turns “clear water” (ferrous) iron into “red water” (ferric) iron which is easily caught by a filter. With a Single Tank Aerator, both aeration and filtration can be performed in the same tank.
Air is one of the most effective treatments for well water with the problems of rotten egg odor and red and black staining. Air adds no chemicals to the water, requires no routine maintenance, and is inexpensive to apply.
Closed-tank aeration is a long established method for preparing iron, hydrogen sulfide, and manganese for removal by filtration.
Single tank units require no electrical pumps, no solenoids, and no external venturis. Single tank units are compact, require little electricity, and are very easy to install, set up, and maintain. Most of all, they are very effective.
B&B Chlorination Systemsto remove Ferric Iron
Mark III – 10 lb Pellet Capacity System
- Designed for commercial/agricultural use
- Uses EPA- registered, 3/8″ dry chlorine pellets.
- Holds approximately 10 lbs
- Adjusts automatically to water usage.
- Provides easy filling, monitoring and maintenance.
minates the need for mixing messy liquid solutions.
Radical Flow IronReduction Cartridge
Easily and effectively reduces up to 3 ppm iron in water, improves flavor, and reduces the metallic taste caused by iron. Reduces the possibility of pipe and water heater damage. The cartridge is designed to provide an easy and effective method of reducing iron in water, which greatly improves taste. The cartridge helps to elimiate the orange and brown stains often found in sinks, toilets, tubs and other plumbing fixtures. It reduces the possibility of damage to pipes and water heaters and reduces up to 3 ppm dissolved iron. It adds no harmful chemicals to the water, making it completetly safe for drinking water applications. The cartridge should be installed on the main cold water line after the pressure tank or water meter. For best results, pre-sediment and post-carbon treatment is recommended.